CONSTRUCTION

  • basing on strip foundations
  • the bearing structure of the building is reinforced concrete (AB)
  • The AB walls of the underground floors are 30 cm thick, and the above-ground floors are 20 cm thick
  • AB mezzanine ceiling panels are monolithic
  • the facade walls are reinforced concrete
  • partition walls inside the apartments are 10 cm or 12.5 cm thick plasterboard covered with two panels on both sides
  • the walls between the apartments are reinforced concrete with a thickness of 20 cm, coated on both sides with a layer of sound insulation


FACADE

  • the facade of the residential part is the ETICS facade system with a thermal insulation thickness of 10 cm
  • the thermal facade system is performed with a system with a final layer of finishing-decorative plaster on a mineral basis, extremely durable


WATERPROOFING AND ROOFING

  • the waterproofing of the underground part of the building is performed with top-quality waterproofing materials and the latest technologies
  • the roof is constructed as a flat impassable roof system with fall concrete, a layer of vapor barrier, a layer of thermal insulation with a total thickness of 15 cm, a final roof synthetic waterproofing membrane - TPO
  • waterproofing of sanitary units and balconies is performed with a polymer-cement waterproofing coating


EXTERNAL CARPENTRY

  • the exterior carpentry of the residential part is made of Class I PVC profile with a broken thermal bridge from renowned manufacturers
  • glazing with iso low-e glass
  • aluminum blinds filled with polyurethane
  • all carpentry positions equipped with mosquito nets
  • the outer window sills are aluminum
  • the internal window sills are stone
  • entrance door to the stairwell made of class I aluminum profiles with a broken thermal bridge

COMMON PARTS

  • the staircases are equipped with personal elevators manufactured by KONE OR TYSSEN KROUP
  • there are high-quality gres ceramic tiles in the corridors
  • on the stairs and landings are high-quality gres ceramics in an anti-slip design
  • the railing and the handrail on the stairs are made of black locksmithery

STORAGE

  • the warehouse floors are made of ceramic tiles
  • all warehouses have mechanical ventilation that is shared

PARKING

  • parking is organized on the plot of the building
  • an automatic sliding ramp is located at the entrance to the lot

JOINERY

  • anti-burglary entrance doors to apartments. The ultimate anti-burglary cylinder in the "system",
  • top quality internal carpentry with comprehensive door frame manufactured by GAROFULI

FLOORS

  • all the floors in the living area are built according to the floating floor system in such a way that the cement glaze is built on elasticized and extruded polystyrene with a total thickness of 5 cm
  • the floors of the entrance area, rooms, living room and dining room are covered with finished three-layer oak parquet factory-varnished with UV matte varnish that sticks to the glaze
  • WC and bathroom floors are covered with Class I ceramic tiles
  • terraces and balconies are lined with non-slip ceramic tiles of class I, resistant to atmospheric influences
  • the floors of common communications, corridors and staircases are covered with gres with anti-slip ceramic tiles of the first class

WALLS

  • the reinforced concrete walls are mechanically plastered in a thin layer, smoothed and painted with dispersive paint
  • partition walls inside the apartments are made of plasterboard, painted with dispersive paint
  • parapets and plasterboard coverings are made of double ordinary or moisture-resistant boards and painted with dispersive paint
  • the walls of the sanitary facilities are lined with class I ceramic tiles up to the ceiling

CEILINGS

  • the ceilings are made in smooth formwork and then smoothed and painted with dispersive paint

SANITARY NODES

  • sanitary equipment is of high quality from the renowned manufacturer Grohe
  • built-in prefab Grohe cisterns
  • Grohe single-handed fittings

ELECTRICAL INSTALLATIONS

  • each apartment is equipped with its own electricity meter
  • storage rooms, elevator, corridors and garages are linked to a separate meter of shared consumption
  • in the common areas, there is anti-incendiary lighting
  • LED lighting is installed in the common areas, and in the basement and corridors, the lighting is switched on via sensors
  • LED lighting with moisture protection is installed in the bathroom and on the loggias of the apartment
  • each apartment has its own apartment distributor for strong electricity
  • every apartment has a video intercom
  • sockets and switches type Schneider or BTcino
  • kitchen electrical equipment: socket for ceiling light, socket for hob, socket for oven, socket for refrigerator, socket for washing machine,
  • socket in the belt above the worktop and socket for the hood
  • electrical equipment in the bathroom: socket for the washing machine, socket next to the mirror with water protection, power outlet for the overhead light above the sink, power outlet for the fan
  • electrical equipment in the hallway: outlet for the ceiling light, apartment distributor for high current, socket, video intercom

INSTALLATION OF WATER PLUMBING AND SEWERAGE

  • the building is connected to the public water supply and drainage network
  • cold water measurements are provided for each apartment separately through a secondary impulse water meter located in the water
  • meter cabinet in the common corridor on the floor
  • the main water valve is located in each apartment
  • water installation is performed with PP-R or ALUPEX water pipes
  • preparation of domestic hot water via a gas condensing boiler
  • sound-insulated sewer verticals
  • condensate drain from split units for heating and cooling mode
  • connections for washing machine and dishwasher

HEATING AND COOLING

  • floor heating and preparation of domestic hot water is achieved through a gas condensing boiler for each apartment separately
  • each apartment has a separate gas and water meter, and the heating is controlled via a thermostat
  • floor heating is performed
  • in all apartments, an inverter air conditioner with a power of 3.5 to 5.5 kW with the possibility of cooling/heating is installed


VENTILATION

  • all rooms facing the facade are ventilated naturally through doors and windows
  • kitchens, bathrooms, toilets and rooms located inside the apartment are forcibly ventilated through ventilation ducts
  • kitchen ventilation (hoods) is carried out on a separate ventilation pipe for each kitchen
  • the ventilation of bathrooms, toilets and rooms is carried out on the central collecting ventilation pipe
  • forced ventilation of bathrooms, toilets and rooms is ensured by a low-noise centrifugal suction fan with a timer